A standard cordless drill is all you need
No specialist tools needed – I just attached my regular Bosch drill and got straight to work. If you thought you needed extra equipment, think again. Everything you need is already in your toolbox.
EARLY BLACK WEEKENDS TONIGHT AT 11:59 PM
NordPull™ is designed to turn cable pulling into a one-person job. Every detail is built for grip and control, so you can pull cables through conduit and tight bends quickly, safely and without hassle.
Limited stock available

“The cable got stuck at the second bend, as usual. Switched on the drill, fed in NordPull™ – and 20 seconds later, it was through. My colleague just stood there with his jaw on the floor.”
Graham Cooper, 4 days ago
If NordPull™ doesn't get through the bend for you, you get your money back – plus a 3-year warranty on the mechanism.
NordPull™ turns cable pulling into a one-person job. Attach your everyday cordless drill, feed in the draw wire or cable, and the two feed rollers push it through the conduit – smoothly and under control, even through the tight bends where a draw wire normally gets stuck.
Stuck? Switch the drill to reverse, back off a little and try again. No pulling everything out and starting over, and your cable is spared from jerks and kinks.
NordPull™ grips draw wires and cables from 5 to 8 mm – for example 6 mm and 7.5 mm fibreglass rods as well as coax and TV cables – in flexible conduit, PVC conduit and installation pipe.
Made for electricians, installers and anyone renovating or running power, network, EV charger or smart home cabling.
It pushes into the conduit whatever you would otherwise push by hand: in most cases the draw wire, and with thinner cables the cable itself. Attach the drill, feed in the draw wire or cable – the two feed rollers push it forward, even through bends.
Flexible conduit, PVC conduit and installation pipe in standard sizes. On the tool itself only one measurement matters: the drive grips draw wires and cables from 5 to 8 mm.
Standard 6 mm and 7.5 mm fibreglass draw rods fit perfectly, as do coax and TV cables of about 7 mm. Thin 3–4 mm steel wire isn't gripped by the rollers. Anything thicker – for example a multi-core cable of about 10 mm – you pull as usual with the draw wire: push the draw wire through, attach the cable, pull.
Payment: You can pay by card or with the payment method you prefer at checkout.
Delivery: Delivery is free and normally takes 2–5 working days. If the product is out of stock in our main warehouse, it is sent from our international warehouse, and delivery can then take up to 1–2 weeks.
Cancelling an order: If you want to cancel an order before it is dispatched, please email us on the same day you placed it, before our customer service closes for the day.
After that, the order is considered confirmed and will be processed. You can still use your 14-day right to cancel under our returns policy.

Used by tradespeople every day
Front plate
Reinforced plate that keeps the mechanism stable.
Housing
Tough construction that protects the tool's mechanism.
Feed rollers
Two rollers guide the cable through the conduit under control, even in tight bends.
Forward and reverse
Easily change direction if the cable gets stuck.
Guide channel
Guides the cable smoothly through the tool.
Drill fitting
Fits standard cordless drills – no special tools needed.
IT PAYS FOR ITSELF
Tap an area and see how quickly the one-off cost pays for itself
What pulling cables without it costs you per year
900 GBP
in lost working time per year
By the 4th tricky pull it has already paid for itself. The rest is your time.
What the helper at the other end costs
240 GBP
per year, just to hold and push
After just 3 jobs without a helper it has paid for itself. You pull alone.
What a single damaged cable costs
165 GBP
one single incident
Redoing a pull just once costs you more than three times as much as NordPull™. And that was just one cable.
Example calculation based on typical trade hourly rates (£50/h) and cautious time estimates. Your actual costs may vary.
It pushes into the conduit whatever you would otherwise push by hand: in most cases the draw wire, and with thinner cables the cable itself. Attach the drill, feed in the draw wire or cable – the two feed rollers push it forward, even through bends.
Flexible conduit, PVC conduit and installation pipe in standard sizes, as long as the conduit is clear. On the tool only one measurement matters: the drive grips draw wires and cables from 5 to 8 mm. Anything thicker you pull into the conduit with the draw wire.
An ordinary one. The hex fitting fits standard cordless drills – you use the one you already have in your bag. No special machine.
Yes, that's exactly what it's made for. The drill does the pushing – you don't need a second person pulling at the other end.
Yes, that's where it helps most. When you run new cables through existing installations, you avoid the usual hassle with the draw wire and makeshift fixes.
Switch to reverse, back off a little and try again – without pulling everything out by hand. That's exactly where it differs from a stiff steel draw wire.
Delivery is free and normally takes 2–5 working days. If the product is out of stock in our main warehouse, it is sent from our international warehouse. In that case delivery can take up to 1–2 weeks.
No specialist tools needed – I just attached my regular Bosch drill and got straight to work. If you thought you needed extra equipment, think again. Everything you need is already in your toolbox.

I used to always have my apprentice at the other end. Now I can do the whole cable pull on my own – just attach the drill and off it goes. Saves me time on every job and means I no longer need an extra pair of hands.

Pulled two CAT network cables through the ceiling, on my own, in just a few minutes. Being able to move forwards and backwards is a game-changer when changing direction. For smart home and networking jobs, this is now my go-to tool.

Exactly where my cable pulling rod always used to get stuck – NordPull™ pushed the cable smoothly and steadily through all three bends. No hassle, no starting over. That alone has already made it worth every penny.

To be honest, I thought it was just another online gadget that wouldn't be any use on site. I was wrong. Solid build quality, grips the cable really well. Now it's earned a permanent spot in my work van.
What I appreciate most is that I no longer have to force the cable through blindly. Instead, I can guide it smoothly and with full control. Less friction, less risk of getting stuck. Simply a job well done.

Renovating an older house with tight, outdated conduits is usually a nightmare. With the reverse function, I could work my way through each tricky section without having to pull everything back out. Saved me half a day's work.
I'm not a professional – I just wanted to run a cable through the conduit to my EV charger. I tried three times with my cable pulling rod and failed. With NordPull™, I got it through on the first attempt. I genuinely didn't expect it to work that well.
I've worked as an electrician for many years, and this is a really clever bit of kit. Especially when you're working on your own.
Works really well! I've struggled to get cables through bends in the past, but this makes the job so much easier.
Easy to use with a cordless drill. Saves both time and frustration when pulling cables.
I was a bit sceptical at first, but I was pleasantly surprised. A clever bit of kit that makes the job easier.
Perfect when you're working on your own and don't have anyone to help feed the cable through.
Feels sturdy and does exactly what it's supposed to. I've used it for several installations around the house.
Very handy for longer cable runs. It's great not having to feed the cable through manually all the time.
Easy to get started with and works with my regular cordless drill. Highly recommended!
It took me a couple of minutes to figure out how to use it, but after that, it worked really well.